Held to a higher standard
Exterior trim, sheets and mouldings, made right.
Premium PVC sealed edge trim, manufactured in our own facility and supplied through dealers across the United States.
The difference shows up on the ladder.
Most PVC trim performs about the same once it is on the wall. The difference is how straight the board comes out of the unit, how clean the edge is, and how many joints you have to hide. That is where Green Atlantic competes.
Standard moulding length. The industry typically stops at 16’, which puts an extra joint in most runs.
Select profiles and Stealth beadboard run continuous where the finish has to be perfect.
Sheets that take board and batten from foundation to roofline in a single piece.
Our thinnest sheet. Flashing-gauge PVC for the details a 1/4” sheet cannot handle.
Every profile, drawn to the same scale.
Every moulding we stock, from our sample board, at actual proportion. Black profiles are shown in black. Select any profile to open its CAD drawing.
One elevation, built from one line.
Fascia to sill, every component on this house is Green Atlantic PVC. Select a point to see the part.
The full line.
Sealed edge trim
1", 5/4" and 6/4" boards, 3" to 16" wide, all 18'.
Sheets
1mm to 1 1/4", in 10' and 20' lengths.
Mouldings
Crown, casing, sill and detail profiles in 18'.
Corners
Folded and extruded, including 45° inside and outside.
Beadboard
Standard, Stealth and planking. Stealth runs 24'.
Water table and soffit
Notched fascia and frieze made to take the soffit.
Column wraps
4x4, 6x6 and 8x8 kits, pre-cut.
Black PVC
Black all the way through. Trim, sheet and moulding.
Built because a contractor asked.
Products we developed when the market did not make what the job needed.
1mm and 2mm sheet
Flashing-gauge PVC, and the rigid flange material behind our trim kits.
45° extruded corners
Inside and outside, one piece, for bay windows and bump-outs.
Fully black PVC
Black through the core, with the same sealed edge as the white line.
Flat astragal
A profile for historical work that is no longer made in wood.
Black, all the way through.
Not a coating and not a laminate. Cut it anywhere and the cut end is black, with nothing to chip at a miter or peel at a scarf joint. A growing range of trim, sheets, mouldings, corners and Stealth beadboard.
Made in our own facility.
Automated feed keeps density consistent through every run, and our edge-sealing system finishes every board the same way, in every width and length. Boards leave the line wrapped in our own protective film.
Production runs under an Intertek-audited quality program.